Archive for FSC certified

Three of a Kind?

Posted in Artisanal, Canadian Woodworking, Furniture Making, Woodwork with tags , , , , , , , , on January 23, 2012 by johnwiggers

About a year ago I received an urgent email from a freelance writer who claimed to be on a deadline to submit a design article to Toronto’s Globe and Mail newspaper. She was keenly interested in my Bow Tie pedestal table, so I quickly sent her specifications, pricing and high resolution images.

It was only after the article was published that I realized what it really was. Called “Three of a Kind“, the article was one of an ongoing series of abbreviated sound bytes which take 3 similar looking pieces of furniture to compare them – primarily on the basis of price.

One previous article compared a $2560.00 Le Corbusier club chair to a $499.00 POS from Ikea. What was the main point of comparison between the two? Both were chairs covered in blue fabric.

A solid birch 3 legged table by Tom Dixon was ambushed in a similar fashion when compared to repackaged landfill offerings from Ikea and West Elm.

What I find unfair about this kind of homogenized design pseudo-journalism is that it doesn’t properly compare apples to apples. For example, my Bow Tie table is a hand made one-of-a-kind piece that is crafted from FSC and NAUF certified woods, non-UF glue and low VOC finish. The top has a hand cut diamond matched inlay pattern, with additional inlays in the collar and plinth made of traditional holistic woods such as Black Walnut and Narra. It’s no surprise that this table ended up being the priciest of the three shown.

The cheapest of the tables was a variation of a block stool that is imported by the containerload from some place in Africa. The table at the intermediate price point is a similar looking piece of mass production that is also imported by the containerload, only in this case from a factory run by Gus* Modern in China.

In the grand scheme of things this “Three of a Kind” concept of literary penmanship isn’t all that difficult to emulate, as I’ll demonstrate here with the following 3 examples of cars.



Please study these images carefully. One is of a finely engineered $2900.00 precision instrument manufactured by Tata Motors of India. At the middle price point we have a Buick Regal by General Motors, which has a base price of $27,000.00. (It’s unclear from the photo whether this particular Regal has been manufactured in North America, or at one of the new GM factories recently built in China). Finally we have a Maybach 57S Coupe that has been customized by Xenatec of Germany to the tune of $1,000,000.00.

Can you tell them apart, even though all 3 of these cars share seemingly identical silvery paint finishes?

Custom Furniture Sample Sale – Digitaria / Blue Star Credenza

Posted in Uncategorized with tags , , , , , , , , , , on January 11, 2012 by johnwiggers

The Digitaria/Blue Star Credenza is a one-of-a-kind that began as an experiment to create a piece of furniture comprised almost exclusively of multi-dimensional surfaces and compound angles.

Measuring 72″ long x 22-1/2″ deep x 34-5/8″ high the exterior is crafted from FSC certified maple ply that has been finished satin black. The angular plinth base is sculpted from polished stainless steel.

The inset top is bevelled Black Glass.

The natural maple interior has adjustable shelves behind each of the end drawers, plus 4 solid maple dovetailed drawers behind the center door. The drawers each run on self closing Blumotion linear ball bearing slides which are activated by a pneumatic touch mechanism. In other words a slight touch is all it takes for each drawer to project open.

Inlays of Padauk and Amboyna in the finished back show the star Sirius and constellation Orion rising over a raised silhouette representing the Great Pyramids at Giza.

Given the extreme complexity involved in making this piece it will not be repeated again.

The List price of $22,915.00 includes custom crate for shipping.

Special discounts during our Sample Sale are available.

Ellipse II Table – The Story Behind Its Creation

Posted in Artisanal, FSC, Furniture Making, Woodworking with tags , , , , , , , , , , , , , , , , , , , , , , on January 11, 2012 by johnwiggers

In 2002 I began to experiment with ideas on how to bend wood across complex three dimensional planes. In the course of doing this I inadvertently created a tapered elliptical cone shape that, at first glance, looked ideal for a dining table base.

After building a prototype of the cone my next challenge was making the top. After heeding advice to “keep it simple” I settled on a pure elliptical oval shape with bookmatched grain and flat edge apron. A 1″ high stainless steel plinth was added to the underside of the base. The resulting table was finished in Tobacco Mahogany, and named the Ellipse Dining Table.

Although the resulting table looked OK, there was something about it that was just plain missing. What bothered me most was the finish – which was a basic chocolate/mocha/expresso brown. At the time this was a safe finish to use, because just about every professional in the interior design industry was using it in one form or another since it “went with everything”.

One could probably credit Holly Hunt and Christian Liaigre with first introducing this look to the high end of the market in the 1990s. By the early 2000s, however, the finish was everywhere and I soon realized that to be the main problem. Namely, because of the finish this table was looking like everything else out there – even the cheap dross knock-offs that were now beginning to flood the market by the containerload from offshore.

By 2006 I decided to refine the design with some subtle changes. I began by using a wood called Nero Chaquiro, which is a lesser known species that comes from an FSC certified forest in Brazil. In addition to being certified as sustainably harvested the use of this wood also helps support an indigenous community living along the banks of the Amazon River by providing a tangible incentive for the peoples living there to manage their surrounding forest responsibly.

The main structure of the table was crafted out of FSC certified ply, which was also NAUF and CARB2 compliant due to the fact that there were no added urea formaldehydes in the glues and binders. To minimize the heaviness of the top the grain pattern was changed to sunburst and the edge profile became a deep undercut bevel. The stainless steel plinth was removed in lieu of a small convex inlay of Narra being added as a subtle detail. The resulting table was finished in a low-VOC water based urethane, and renamed the Ellipse II Table.

Taken together these changes created a more sculptural look to the design, and the response from the design community was tremendously positive. Our ability to custom tailor this design to meet the requirements of each individual client has since resulted in the Ellipse II Table becoming one of our most popular offerings today.

In October 2008 a custom commission of this table for interior designer Wendy Blount was even published in an issue of Metropolitan Home magazine.

Thanks to the positive response this article received, the table photo was subsequently republished in the book “Glamour: Making it Modern” by Michael Lassell.

Sustainable, Environmental, Eco Lifestyles, Healthy, All Natural, Home and Garden, Interior Design, Eco Friendly, Green Furniture, Green Furnishings, Green Designs, FSC Certified, Reclaimed Materials. Organic, LEED compliant, NAUF. CARB2, Bamboo, Natural Fibers. Non-Toxic, low-VOC, Non VOC, Natural Finishes.

Custom Furniture Sample Sale – San Francisco

Posted in Uncategorized with tags , , , , , , , , , , , , , , on January 11, 2012 by johnwiggers

Recently the showroom representing our work in San Francisco closed its doors due to the retirement of its owner, Enid Ford.

Enid’s former showroom manager Johanna Spilman has since decided to open her own showroom offering the same high standards of fine quality furnishings.

To help facilitate this move we are offering special pricing on the following three floor samples currently being showcased there.

This Ellipse II Table is without doubt one of our best selling designs. Measuring 84″ long x 42″ wide x 29″ high this table is crafted from a rare sampling of Nero Chaquiro, which comes from an FSC certified forest in Brazil. The top has a custom diamond matched grain pattern, and the finish is a low-VOC high gloss.

List price on this Ellipse II Table is $12,540.00.

This Atherton Chest has 3 drawers and measures 32″ wide x 19″ deep x 28-1/2″ high. It is crafted from a dark South American FSC certified wood known as Louro Preto. The finish is low-VOC high gloss and the handles and feet are satin stainless steel.

List price on this Atherton Chest is $10,295.00.

A custom version of the Kidney Shaped Desk is also on display in Johanna’s showroom, which was made from a spectacular flitch of reclaimed vintage Macassar Ebony veneer. The desk measures 75″ long x 35″ deep x 30″ oah. The top was made without the leather inset shown in the photo, so it has an all Macassar Ebony top surface finished in low-VOC high gloss. Three dovetailed drawers are fitted into the apron, with the center pencil drawer containing trays. The plinths below the Macassar Ebony legs are satin stainless steel.

List price of this custom Kidney Shaped Desk is $16,305.00.

For more information and specifics on discounts for these samples, please contact:

Johanna Spilman
Johanna Spilman Inc.
195 Rhode Island
San Francisco, California 94103

415-255-1777
415-255-2777 (f)

johanna@johannaspilman.com

Kidney Shaped Desk at the “My Grain” Exhibition

Posted in Uncategorized with tags , , , , , , , , , , , , , on July 13, 2011 by johnwiggers

This Kidney Shaped Desk measures 75″ long x 35″ wide x 29″ high.

It has been crafted from FSC certified Ebony which has been hand cut to create a radiating pattern around an FSC certified plywood core.

The glue used to apply the Ebony is non-UF (urea formaldehyde), and the finish is low-VOC polyurethane.

The inset top has a subtle bevel edge, and is clad in black Tuscany leather.

A total of 3 drawers have been built into the apron, with each one being made from solid Cherry and fitted using sliding dovetail joinery.

In addition to using FSC certified woods to build the main body of the desk, several lesser known species of wood have also been incorporated into the design to communicate a more comprehensive story about sustainable wood use.


In the very centre of the pencil drawer a small compartment has been carved into a block of rare wood known as Hawthorn. Hawthorn is a traditional healing wood that has been used in medicinal practice for a considerable period of time. It was well known to the ancient Greek herbalists, and records indicate that it has been used in Ayurvedic medicine dating back almost 5,000 years.

Hawthorn is considered an aroma-therapeutic healing wood since it produces an aerosol of complex compounds – all of which are medicinal. The primary benefit of the aroma-therapeutic properties of the Hawthorn is to help alleviate stress and strengthen the heart.

On either side of the Hawthorn compartment is a pair of pencil trays made of a wood called Sassafras. Sassafras carries within it oil based complex of compounds that are naturally saturated within the wood itself – both as a wax and as oil. Through handling and the bumping action of contents against the fibers of this wood, the oils contained within this wood are released as an aerosol each time the drawer is opened.

This aerosol is considered to be a tonic to the human body, since it helps to promote an overall feeling of well-being. This state increases the ability of the deep centers of the brain to promote increased and clearer thinking.

The oil of the Sassafras is related to Myrrh, one of the legendary woods of the ancient world. Sassafras is also the wood used for spiritual cleansing by many tribes of North American Indians, in their traditional sweat lodge ceremony.

On the underside of the drawer fronts are inlaid finger pulls that have been crafted from wood that comes from the Black Walnut (Juglans nigra) family of trees. Native American medicine women discovered through many generations of trial, error and observation that this wood has medicinal properties that are useful in the prevention and treatment of disease. It is believed that simply touching this wood will release the active molecules to the surface of one’s skin, where they can be naturally absorbed into the pores.

In recent years a scientific basis has been discovered that supports this traditional wisdom, and the active molecules (known scientifically as ellagitannins) are currently at the leading edge of research into finding a cure for cancer.

Please note that the inclusion of traditional holistic woods such as Hawthorn, Sassafras and Black Walnut into the design of this desk does not promise any particular holistic or therapeutic benefit to the user. This information has been shared to give others a broader understanding and appreciation for trees, by helping to see them as being more than mere sources of raw material.

Additional information on the Kidney Shaped Desk, and the story behind its creation, can be found at the following link. This link also gives background information on a botanist and scientist by the name of Diana Beresford-Kroeger, who played an instrumental role in providing the information for the holistic woods used on this desk.

This Kidney Shaped Desk is currently on display at The Guild Shop in Toronto, where it will be part of the “My Grain” Exhibition, which opens on Saturday July 16.

Road Trip Delivery of Eco-Furniture to Orlando, Florida

Posted in Uncategorized with tags , , , , , , , , , , , , , on July 13, 2011 by johnwiggers

In an earlier post I described a road trip to Hollywood, Florida during which we delivered custom furniture to a luxury condominium at the Trump Hollywood. This trip reminded me of another project we delivered to Orlando, Florida in May of last year.

My son Kevin accompanied me on this delivery and along the way we took a few hours break to catch an MLB baseball game at Turner Field, between the Atlanta Braves and the Cincinnati Reds.


Kevin is clearly looking forward to seeing the game.


After an 8 run 2nd inning by the Reds, including a grand slam by Joey Votto, it looked like the rout was on.


This guy is probably the most avid Braves fan around. He claims to have been to EVERY single Atlanta Braves home game (in the same seat at Turner Field) stretching back over 1000+ games. He’s also a walking encyclopedia on baseball facts and trivia.


Expect the unexpected. In the bottom of the 9th the Braves rallied back from a 9-3 deficit with 7 runs, including a walk-off grand slam by Brooks Conrad to win the game 10-9. The place went nuts. It turns out this was only the 24th time in MLB history that this has happened, so we truly witnessed some history in the making.


Kevin with the Braves superfan, moments after the incredible come-from-behind victory. (Incidentally, at the end of the 8th I told Kevin that we couldn’t leave yet because the Braves were going to come back and win via walk-off grand slam. Good call, Dad!)


The reason for the road trip: overseeing delivery of custom made eco-furniture to a home near Orlando, Florida. This bedroom furniture includes an Irenic Bed and Inamorata casegoods made of FSC certified wood (that is also NAUF and CARB2 compliant), non-UF glue and low-VOC water based finish that is doctor recommended even for those with chemical sensitivities. The mattress is made of natural latex. The finish on the furniture is glazed maple.


This natural cherry finished furniture is for the guest bedroom. Consisting of an Irenic Bed and Inamorata casegoods it is also made of FSC certified wood (that is also NAUF and CARB2 compliant), non-UF glue and low-VOC water based finish that is doctor recommended even for those with chemical sensitivities.


The custom Inamorata Boxer Chest is made of natural cherry with the drawer fronts being made of Curly Birds Eye Maple from my Core Stash. All drawer boxers are dovetailed solid maple (FSC certified) running on Blumotion self-closing linear ball bearing slides. The drawer pulls are satin nickel.


This set of 3 custom made Island Tables is made of Louro Preto. The inset of river stones on the Cayman Table has been covered with a custom tempered glass top, to keep the cat from using it as a litter box.


This Ellipse II Table has been custom made in bamboo. The top features a radiating sunburst pattern and the finish is a low-VOC water based urethane.

All in all I was highly impressed by the level of research the client put into this project to verify that every aspect of our work was as environmentally responsible as possible.


Celebrating a delivery gone well….fresh ingredients + stainless steel bowl + liquid nitrogen = best ice cream ever. This shameless plug is for a hidden gem called the Pure Magic Ice Cream company. It’s located in Kissimmee, Florida.


When your kid is too old for Disney World, the next best thing is a ‘ghetto ride’ in downtown Orlando.


‘The Boy’ is stoked.


With some time to ourselves we checked out a street festival in downtown Orlando. While walking around we stumbled into this custom chopper with its own built-in humidor and port bar. The chopper lured me inside the Corona Cigar Company, which turns out to be North America’s largest walk-in humidor…boasting an inventory of 2,000,000 +/- cigars. It turns out that we inadvertently discovered the cigar afficionado’s motherlode of Arturo Fuente’s, Hemingways, Ashtons, and Diamond Crowns.


The obligatory photo of me with the chopper.


The Diamond Crown Cigar Lounge. Stocked with pre-embargo Cuban cigars and Prohibition-era rum, not to mention ice cold beer. With the outside temperature hovering around 92 degrees it made sense to chill out with a beer and a stogie in air conditioned comfort. We returned later to catch game 3 of the NBA Eastern Conference Final although, unfortunately, the Magic failed to show to play the Celtics that night. It was an enjoyable experience nonetheless – downtown Orlando is definitely a happening place on a Saturday night.

Custom Cabinet for a Four Seasons Hotel

Posted in Uncategorized with tags , , , , , , on July 8, 2011 by johnwiggers

Over the years we have made a variety of custom furniture pieces for many 5-star luxury hotels including Four Seasons, Mandarin-Oriental, Ritz-Carlton and Umstead Hotel and Spa.

Typically the pieces we make are either the specialty pieces that get showcased in public areas, or custom furnishings that go into the restaurants, cocktail lounges and the most luxurious of penthouse suites.

Recently we completed a custom Audio/Video Cabinet that will be delivered to the Presidential Suite of a newly renovated Four Seasons Hotel.

This cabinet was custom made out of a combination of FSC certified Ebony veneer, and satin black lacquered panels.

The tops on each of the end cabinets are made of 1-1/4″ thick Nero Assolute granite.

The drawers are dovetailed solid maple, running on concealed and self-closing Blumotion linear ball bearing slides.

The cabinet interiors are finished in satin natural maple, and the inlaid grommet in the backs allow for wiring.

After final cleaning and inspection the cabinet is wrapped in tissue and bubble wrap, before being crated for shipping.

Ellipse Table Made of Bamboo

Posted in Uncategorized with tags , , , , , , , , , , , on July 6, 2011 by johnwiggers

In a previous post I described the creative process behind making the Ellipse II Table out of bamboo.

Bamboo has been available to custom furniture makers in veneer and plywood form for a number of years. It’s use as a “green” material, however, has not been without questions and controversy.

In simple terms bamboo is considered a sustainable alternative to wood because bamboo is actually a grass and not a wood. Ironically, as demand for bamboo has grown many forests in south-east Asia have ended up being cut down to make way for bamboo plantations. This reality can hardly be interpreted as protective of trees and forests.

In addition there have been many questions about herbicide and pesticide use on these plantations, as well as the use of urea formaldehyde glues in the making of bamboo ply. And this doesn’t negate other questions having to do with issues of fair labour practices in the growing, harvesting and processing of bamboo as a material.

In recent years these issues have been addressed with the introduction of FSC certification to the bamboo marketplace.

Given this availability of FSC certified bamboo that is also NAUF and CARB2 compliant I decided in early 2010 to prototype a custom made version of the Ellipse II Table crafted exclusively from carbonized bamboo plywood. The actual material came from a company called Nadurra in Toronto.

The sculpted elliptical cone base was made from stacked laminated bamboo ply sheeting that was milled and sanded to achieve its final shape. The top was made from a full sheet of bamboo ply, with the corner offcuts being used to make the built up aprons for the undercut bevel edge.

All surfaces were then sanded smooth and rubbed in a low-VOC natural linseed oil finish.

The table as shown here was unveiled at the Green Living Show in Toronto in April, 2010.

It measures 60″ long x 37″ wide x 29″ high.

This table is currently on display at The 2011 Design Time Cottage on Lake Rosseau in Muskoka, Ontario.

Sustainable, Environmental, Eco Lifestyles, Healthy, All Natural, Home and Garden, Interior Design, Eco Friendly, Green Furniture, Green Furnishings, Green Designs, FSC Certified, Reclaimed Materials. Organic, LEED compliant, NAUF. CARB2, Bamboo, Natural Fibers. Non-Toxic, low-VOC, Non VOC, Natural Finishes.

Whale Tail Desk – The Story Behind its Creation

Posted in Artisanal, FSC, Furniture Making, Whale, Woodworking with tags , , , , , , , , , , , , , on June 11, 2011 by johnwiggers

In the Autumn of 2001 my daughter was working on a school project that had to do with whales. Her writings contained all the standard textbook information available on these creatures, i.e. “whales are the world’s largest mammals; they live in the sea; they eat fish or plankton, and they are endangered.”

After reading her project to me, she asked what I knew about whales. I told her that in the St. Lawrence River (which lies between Canada and the United States) when a dead whale washes ashore it’s carcass is so contaminated with pollutants that it has to be handled and disposed of as toxic waste. Needless to say, her eyes went wide as saucers and her whale project evolved along a whole new tangent.

That conversation made me wonder about what it is that our schools are teaching our children. Or, rather, what it is that our schools are not teaching.

My daughter and I ended up talking a great deal about whales, and out of those discussions came a promise that the following summer we would take a trip out east to see some real whales, up close and in the wild.

Not long after this discussion I received an invitation from World Wildlife Fund to build a showcase exhibit for the inaugural “Forest Leadership Forum” to be held in Atlanta, Georgia in April, 2002. Given that the show was focussed on protecting the world’s forests, I was challenged to come up with a cool idea for a piece of furniture made of FSC certified wood.

For several months I vascillated with the idea of whether or not to even participate in the show. The events of 9/11 were still very much fresh in my mind, and the thought of flying anywhere wasn’t holding much appeal for me.

By early 2002 I was still undecided on what to do, but now I was facing a deadline. I was stuck with the furniture designer’s equivalent to writer’s block. Nothing clever was manifesting in the way of ideas, although I had concluded that my furniture piece should be a desk of some kind.

Then one night I’m watching television and there’s a program on about saving whales, and I see the actor Pierce Brosnan speaking on behalf of the whales.

I was already familiar with Brosnan because at that time he was also a spokesperson for FSC.

The connection of Brosnan to both whales and FSC suddenly melded with my idea for a desk, and everything came together in a flash: FSC + Whale + Desk.

Grabbing a pencil and a thin piece of cardboard I scribbled out a quick rendering of a desk based on what a whale’s tail would look as it breeched in preparation for a deep dive. Cutting this out with scissors I then Scotch taped the pieces together into a crude scale model. The result was an actual miniature prototype, and the whole process probably took no more 15 minutes to do.

This model was then scaled into working drawings, and the woodworking process began. The main face of the torso and tail started as an oversized T-shape slab of 1-1/4″ veneer core ply that was cross laminated with Macassar Ebony veneer. Relief kerfs were cut into the underside for bending the curve. Plywood offcuts were used to make elongated L-shaped vertical gables, with the 1″ ply floor set into dadoes.

An anthracite grommet was inset into the top, to allow wiring to pass through to the vertebrae wire management column running vertically inside the torso of the desk. For stability the desk was engineered to be secured to the floor with lag bolts.

After a thorough sanding the exposed surfaces were finished in a high gloss low-VOC polyester finish to enhance the grain and give a glossy “wet look” to emulate a whale rising from the water.

The finished Whale Tail Desk was displayed at the “Forest Leadership Forum” in late April, 2002 along with a custom made Andiroba Credenza crafted from the same wood and finish. These pieces are both now part of a private collection in Moscow.

A few months later our family travelled east to New Brunswick and took a long ferry ride to a remote island called Grand Manan, which lies just off the coast of Maine. We arrived on the island on August 6th and had advance reservations to go on a whale watching tour the following morning.

As we travelled around the island I soon learned from the locals that whale watching was not an exact science. Even in optimal summertime conditions such tours are highly dependent on the weather, the seas and the fog. I was told that in the previous 2 weeks hardly any tours had managed to make it out to sea because of heavy fog. And even when boats did make it out, there was no certainty of even seeing a whale – let alone seeing one up close.

I now felt concern that expectations for the trip might not unfold as planned. We had a wedding to attend in a couple of days, and our only opportunity to see whales would be the following morning. My daughter in particular was excited at the prospect of seeing a whale, and I did not wish to see her disappointed.

That night I took a walk to a small rise of land overlooking the sea. I prayed for good weather and silently called out into the darkness – asking for a whale to make an appearance the following day.

We arose before dawn and made our way to the harbour where a small converted lobster boat took us into the Bay of Fundy, to an area where whales traditionally feed. Luckily for us, the weather, the fog and the seas were all working in our favour, and conditions were nearly perfect.

After a bitterly cold 2 hour ride, the boat’s captain spotted a pod of 6 or 8 whales on the horizon. He slowly eased to within about 1/2 mile of where these whales were, and shut off his engine. Now we had to wait, with cameras ready, scanning the horizon in anticipation of the whales coming to the surface. We didn’t know when, or where, these creatures might appear.

For the next 20 minutes we enjoyed sporadic sightings of whales in the distance. These massive creatures would suddenly and unexpectedly emerge from the depths, then crash back into the sea with huge plumes of water and spray. Everyone was crowded to the starboard side of the boat, methodically snapping off frame after frame of film.

Given the unpredictability of the whales appearing on the horizon, I was snapping through an incredible amount of film in the vain hope that one of these shots might yield an incredible photo. At one point I stepped back from the group to change film when the most amazing and magical thing happened. Unbeknownst to any of us a huge Humpback Whale had quietly surfaced behind the boat. This whale didn’t make a noise, and not one of us even noticed he was there.

As I busied myself with changing my film an odd feeling suddenly came over me. Casting a slow sidelong glance over the stern I found myself looking – no more than 10 feet away – right into one of eyes of this massive creature. In one brief moment I felt the whale say to me, as if telepathically, “you asked for me to appear. Here I am.” Needless to say, as soon as I announced the whale’s presence behind our boat everyone stampeded to the back for a better look.

The feeling of being small and powerless was overwhelming. Humpbacks can grow to a size of 40 tons, and if he wanted to this whale could easily have flipped our boat like a cork in the water. But this was not how things unfolded.

It was as if this whale had been waiting for us to show up, and he was floating patiently in the water until he was sure he had our undivided attention.

He slowly raised the top of his bumpy head out of the water, as if to confirm with his own ancient eyes that we were all watching. He then exhaled a huge, bushy spout of misty air with a sound not unlike that of an elephant’s trumpet. And let me tell you, after a lifetime of eating seafood that fellow could definitely have used a breath mint. Children were giggling at how bad his breath smelled.

But the best was yet to come, and the only way to describe it would be to say that this whale grabbed this moment to, literally, seize the proverbial stage and ham it up for our cameras.

It was a most amazing few minutes of time, during which this wild mammal – of its own accord – decided to approach our boat in a manner that gave us both the time and the angles necessary to take some absolutely phenomenal photographs. It would not be an exaggeration to say that this whale was probably posing for some of the shots.

On our long ride back to the harbour I considered what might have motivated such an untamed creature to behave in this manner. I know that whales are highly intelligent, so on some instinctual level this individual would probably know that the greatest threats to its survival (i.e. pollution, collisions with ships, entanglement in fishing nets, and slaughter by commercial industry) all come from humans.

In spite of this, this whale took incredible risk to reach out and connect with us.

Perhaps, deep down, it was because this whale also realises that as much power as Man has to destroy, Man also has the power to change – and to protect. And maybe through connecting with us, this whale is also trying to secure his own future survival by sharing with us that feeling of oneness with him.

It would be easy to dismiss this magical moment was an isolated incident, a coincidence, or a figment of my imagination. But I do not believe this to be the case.

When we arrived on Grand Manan the day before, there was a story circulating amongst the locals about a Humpback Whale and her calf which had become entangled in fishing nets earlier in the week. Such entanglement is a guarantee of certain death for a whale, especially calves. To the amazement of the locals these two wild mammals instinctively swam right up to a research vessel and waited patiently on the surface of the water while deckhands used knives to cut away the netting. Somehow these whales intuitively knew what they needed to do in order to survive.

Life finds a way, and we should never underestimate the magic at work in Nature.

The natural world is clearly speaking to us. But the question is: Are we listening?

Kidney Shaped Desk – The Story Behind Its Creation

Posted in Artisanal, FSC, Furniture Making, Woodworking with tags , , , , , , , , , , , , , , , , , , , , , , , , , , , on June 5, 2011 by johnwiggers

In 2002 I was experimenting with ideas that would ultimately manifest as the Kidney Shaped Desk. My initial concept was an organic form that would incorporate a variety of green and holistic elements into the design. Given that Feng Shui principles consider a kidney shape to be most auspicious for use as a desk, I used this as my starting point.

During a visit to Miami in April of that year I floated the idea to Amelia Hyde and Monroe Sherman, who were partners in a showroom called Carriage House which was then representing my work in South Florida. Amy seemed quite receptive to the idea, which was no surprise given her interest in spiritual philosophies such as Tao and Zen Buddhism.

About a week after my return Amy called and asked me to explain more about the Ayurveda I was talking about during my visit. I didn’t have a clue what she was referring to and told her I could barely pronounce the word, let alone spell it. But for some reason Amy insisted that I had talked at length about Ayurveda and as she described what it was about she mentioned the connection of Ayurveda to yoga, and the connection of yoga to a famous supermodel and yoga practitioner by the name of Christy Turlington.

As soon as she mentioned Christy’s name I heard my fax line ring. It was an incoming fax from New York, from a furniture designer by the name of Vladimir Kagan. He was inviting me to a special party being held later that month. The invitation was for an event being hosted by Ralph Pucci in his Manhattan loft, which would be a joint unveiling of Vladimir Kagan’s furniture pieces alongside a new line of yoga inspired clothing by Christy Turlington.

Because of this unusual coincidence I decided to trust my intuition and immediately decided to accept. Since the party coincided with a major New York design show called the International Contemporary Furniture Fair (ICFF) that I was planning to attend anyway, the logistics worked out perfectly.

After arriving at the designated address in lower Manhattan I stepped out of the cab thinking I was in the wrong location. I had been told that Pucci’s loft was magnificent, but the neighbourhood I was standing in was anything but. Nevertheless a discrete elevator ride to the loft soon confirmed that I was at the proper venue.

As soon as the elevator doors opened I was greeted with a palpable buzz of energy and excitment. Scattered throughout the 15,000 sq. ft. minimalist loft were countless bisque mannequins that were essentially full-scale reproductions of Christy Turlington herself. These mannequins were shown in a variety of different yoga poses and, naturally, each was also attired in various examples of Christy’s new clothing collection, called Nuala.

At the far end of the loft Vladimir Kagan was holding court amongst examples of his classic furniture collection. As soon as Vladimir saw me walk in he called me over and gave a big hug. It was wonderful to be greeted in this manner by such a design legend, because I had long admired his work.

When I was younger I used to enjoy reading various design publications to see examples of the most beautiful and exquisite furniture pieces ever made. A Rosewood desk by Vladimir Kagan had long been one of my favorites, and never could I have imagined at the time that one day I would be working with this icon to build some of his actual furniture.

As I walked around the loft and mingled with other guests I began to ponder the coincidence of being invited to this party. At one point I did get introduced to Christy, and did have a brief conversation with her. While our discussion did not provide any particular answer or overt moment of enlightenment for me, I was definitely struck by Christy’s open sincerity and genuineness. She is one of the very few people I have ever met who have an aura of presence that absolutely radiates positive energy.

By the end of the evening I left party pondering the enigma of attending an event that displayed beautiful, sculptural furniture alongside an ancient holistic principle such as yoga. When considering Ayurveda as the thread connecting the two, how would it be possible to merge them together as one?

The answer, I soon discovered, lay with someone I already knew.

Diana Beresford-Kroeger is an award winning author, independent scientist and passionate environmentalist living near Ottawa, Canada. On a secluded rural property shared with her husband Christian, Diana has spent many years and considerable effort researching and documenting the interconnected relationships that exist between trees and forests, and the wildlife that abounds within.

She is highly regarding for her illuminating and seminal work, and amongst her many admirers are colleagues such as E.O. Wilson of Harvard. In the 1960s Wilson effectively became the founding grandfather of the global environmental movement when he first coined the phrase “bio-diversity”.

I first learned about Diana in 1999 when I read a newspaper article describing her “Millenium Project”. The vision of this project was to share and distribute seeds from Diana’s collection of rare and endangered tree species. By doing this she hoped to establish new living examples of genetic strains that were at risk of becoming extinct.

In addition, by distributing these seeds widely it was also hoped that the resulting seedlings would become isolated pockets of bio-diversity, as well as a form of insurance policy in case disease, blight or other disaster happened to wipe out the sentinel trees that provided the original genetic material. Since in some cases there were only singular examples of these rare trees known to exist, this was a very valid and noble ambition.

Her “Millenium Project” sounded brilliant, and I contacted her to learn how I could participate. At the time I was in the planning stages of building a new shop, and the notion of introducing rare and unusual trees to the property seemed like a perfect one. Diana helped develop a bioplan for what I was intending to create, and over time our discussions evolved into an ever expanding exchange of ideas.

After my return from New York I continued to wrestle with the idea of how to meld holistic Ayurvedic principles with sculpture furniture design. Simultaneously I was talking with Diana about her latest book manuscript, entitled “Arboretum America”. She was having great difficulty getting this book published, and in an effort to get the word out she went to great lengths describing what the book was intending to say.

I listened with great interest as Diana explained the book, and how each of the 20 tree species described within were presented by way of their biological eco-function within the larger global garden. My interest was piqued further as Diana explained how each tree had a particular holistic attribute, or “gift”.

Apparently much of the information collected by Diana had originally come from Native American elders and healers. Her desire to document this traditional wisdom was driven by the fact that many of these elders were quite old, and once they died they would take their knowledge with them to the grave. Considering that most indigenous cultures base their information sharing and retention on oral tradition -with very little being written down – it was quite apparent that once this knowledge was lost it would be lost forever.

Eager to help Diana get her book published I invited her to an informal gathering that was to take place in Ottawa later that year, in conjunction with an FSC Canada board meeting being held there. Given that the event would be filled almost exclusively with people interested in protecting the forest, I felt certain that something beneficial for Diana would unfold.

On Saturday October 19th a number of us were gathered at the home of one of the Board members, who happened to live nearby. Diana and her husband Christian were in attendance as well, but before long it appeared that the evening would not unfold as hoped for.

After a day of intensive Board meetings most people were simply looking to unwind. Diana, on the other hand, was quietly eager to network and find means of clearing hurdles to her book. But aside from some polite discussion and general exchange of ideas no one was expressing any serious interest in her research. I felt disappointed that they may have wasted their time coming here.
At one point, however, one of the Board members was casually flipping through the manuscript when something caught her eye. In describing the medicine of a tree called Black Walnut (Juglans nigra), Diana had pointed out that this tree’s active molecules (known scientifically as ellagitannins) were currently at the leading edge of ongoing research into finding a cure for cancer. Apparently Native American medicine women had discovered through many years of trial, error and observation that this tree’s natural properties were helpful in preventing disease.

Within minutes several women were tightly huddled around the book, reading with intense fascination. I glanced over to where Diana and Christian were sitting, and exchanged a smile. Not only had a catalyst been found to suddenly pique interest in the manuscript but I too had discovered, by default, the vehicle for melding Ayurvedic principles with sculptural furniture design.

Why not create furniture that incorporated discrete inlays of holistic woods, and let these examples become a tangible and tactile means of communicating the same message that Diana was trying to say on paper?

In the months that followed my ideas surrounding this concept continued to swirl in my mind. Ultimately they became manifest in a design called the Kidney Shaped Desk. Using careful mathematics and sacred geometric proportions based on Feng Shui and Vastu Shastra principles, this desk was also designed to utilize discrete inlays of wood that were ultimately suited to their particular holistic attributes.

For example, special cuttings of Black Walnut would be used to make finger pulls on the underside of drawers. In this way the act of opening the drawers would allow the active molecules of the wood to come into contact with one’s skin, where the molecules could be naturally absorbed into the pores. Inside the pencil drawer woods such as Hawthorn and Sassafras would be incorporated for their natural holistic and aroma-therapeutic properties. The scents of these woods would accumulate naturally inside the drawer while it was closed – and released each time the drawer was opened.

For the time that her manuscript remained unpublished, Diana asked me to sit on the information. Her concern was that if the knowledge was shared too early it might scuttle publication of the book. Out of respect, I complied. In the meantime the hiatus gave me ample opportunity to tweak and fine tune the proportions of the desk until everything was perfect.

It wasn’t until the following year that Diana called to say that University of Michigan Press had committed to publishing her book. At this stage she also gave me the green light to proceed with the desk, and help communicate the medicinal knowledge of the trees.

“It’s time”, she said.

Although eager to see this design manifest into reality, I was in no financial position to undertake the building of a prototype simply because it seemed like a great idea. Unless a buyer could be found who would commit to buying the finished piece before it was made, this design would have to be shelved indefinitely.

Little did I know that within days a buyer would end up appearing, in the form of a design visionary by the name of Todd Marckese.

I first met Todd while exhibiting at the Chicago Design Show in 1998. At the time he was principal of Marckese Design Studio in Orlando, Florida. His client list was prestigious and his work was recognised in many design publications including Architectural Digest, Florida Design and Showboats International.

Todd was exploring the idea of branding his own furniture collection, and he asked if I might be interested in doing product development and prototyping with him. We exchanged business cards, but it would be almost 5 years before we spoke again.

When he called in the summer of 2003, Todd asked if I remembered our conversation in Chicago. I did, largely because of the unusual business card he left behind. Measuring just over 2 inches square this card stuck out both literally and figuratively. Todd laughed at my observation, pointing out that it was necessary to be different in order to be remembered.

Todd went on to say that he was working on an upscale residence and the project required many unique pieces of custom furniture design. One of the pieces he was looking for was a desk, but it came with the proviso that his clients had strong holistic inclinations and, therefore, a conventional desk would not work.

As he described the parameters of the project my interest level piqued because it seemed the Kidney Shaped Desk design I had been tweaking for almost a year would meet the specifications perfectly. I faxed him the drawings and explained in detail the holistic attributes of the various woods I was intending to use as inlay.

After presenting the proposal to his clients, they fell in love with the idea and ended up commissioning the desk. The resulting piece measured 75″ x 35″ x 31-3/4″ overall height.

The main structure was crafted from FSC certified ply, and laminated with Macassar Ebony veneer. The inset of black Tuscany leather was bordered with a radiating grain pattern of wood that was cut to allow it to cascade like a waterfall down the vertical sides of the apron. The plinths on the legs were satin stainless steel.

Inset into the back of the desk were 3 drawers crafted from solid cherry. These drawers were mounted to the Macassar drawer fronts my means of sliding dovetail construction.

Inside the pencil drawer was a pair of trays made of a wood called Sassafras (Sassafras albidum). Sassafras carries within it an oil based complex of compounds that are naturally saturated within the wood itself – both as a wax and as oil. Through handling and the bumping action of contents (i.e. pencils and pens) rolling against the fibers of this wood, the oils contained within the Sassafras are released as an aerosol each time the tray is opened and exposed to air.

The oil of the Sassafras is related to Myrrh, one of the legendary woods of the ancient world. Sassafras is also the wood used for spiritual cleansing by many tribes of North American indigenous peoples, in the traditional sweat lodge ceremony.

Centered between the trays is a small storage compartment crafted from a block of rare wood known as Hawthorn (Crataegus). Hawthorn is a traditional healing wood that has been used in medicinal practice for a considerable period of time. It was well known to the ancient Greek herbalists, and records indicate that it has been used in Ayurvedic medicine dating back almost 5,000 years.

Hawthorn is an aroma-therapeutic healing wood since it produces an aerosol of complex compounds – all of which are medicinal. The primary benefit of the aroma-therapeutic properties of the Hawthorn is to help alleviate stress and strengthen the heart. According to Diana Beresford-Kroeger this aerosol is considered to be a tonic to the human body, since it helps to promote an overall feeling of well-being. This state increases the ability of the deep centers of the brain to promote increased and clearer thinking.

The Hawthorn storage compartment was covered with a lid that was crafted from the same cutting of Black Walnut used to make the inlaid finger pulls on the underside of the drawers. Set into the face of the lid were inlays of the three traditional healing metals of gold, silver and copper. Working with a jeweller these precious metals custom crafted into the shapes of an Eagle, Turtle and the sacred Tree of Life, respectively.

Collectively these 3 images tell the aboriginal story of Creation, which is essentially a parable that tells of the emergence into the current world after the previous one was destroyed by a great Flood.

Flood legends are found in the mythology of most ancient civilizations; from the Sumerians, Babylonians and Egyptians of the Middle East, to India, China and in the Americas in the myths of the Mayans, Aztecs, Hopi and numerous other Native American tribes. In Western society the most recognised of these legends is the story of Noah and the Ark, as recounted in Biblical story of Genesis.